Antenna Extension Cable with Reverse SMA Connection

Wireless signal power can be reduced by other electronic devices, walls and objects. Moving your wireless antenna a little further away, or through into a different room/hallway/more central location should enhance your signal so that it does not drop out or improves the speed transfer.

RP-SMA is the standard connection for most routers

Connection: Male RP-SMA (standard for most wireless routers/PCI cards with removable antenna) to Female RP-SMA
Length: 2.5m
GOLD Plated ends
Very Low-loss Cable
Frequency: 2400-2500MHz (2.4g to 2.5g)

Complies with IEEE 802.3 10Base-T and IEEE802.3u 100Base-TX standards
5 or 8 port 10/100 Mbps Nway Ethernet / Fast Ethernet Ports
Full/Half Duplex for each port
Operating at maximum packet filtering and forwarding rate
Supports for store and forward of packet switching
Supports auto MDI/MDIX connector for easy expansion
Compact design for SOHO applications, external AC Power Adaptor
Comprehensive LED indications for port status indication
Expandable by cascading more hubs together

Complies with IEEE 802.3 10Base-T and IEEE802.3u 100Base-TX standards
8 port 10/100 Mbps Nway Ethernet / Fast Ethernet Ports
Full/Half Duplex for each port
Operating at maximum packet filtering and forwarding rate
Supports for store and forward of packet switching
Supports auto MDI/MDIX connector for easy expansion
Compact design for SOHO applications, external AC Power Adaptor
Comprehensive LED indications for port status indication
Expandable by cascading more hubs together

NL-HP200SG are compliant with HomePlug AV
specification 1.1 and have a High Speed Transfer rate of up to 200 Mbps.
The Powerline Ethernet Adapters 128-Bit Encryption with key Management. A
minimum of two Adapters are needed and more can be added as the network grows
.Target Applications:
• High Data rate Broadband Sharing
• Shared Broadband Internet Access
• Audio and Video Streaming and Transfer
• Extending the coverage of Wireless LAN’s
• Computer File and Application Sharing
• Network and Online Gaming
• IP based Security Cameras

*** This Product is NOT Backwards Compatible with the 85Mbps Model(s) ***

ANTENNA BASE, SMA
Length, Cable:1.5m

300Mbps Access Point Router
2.4GHz 2T2R
Complies with IEEE 802.11n, IEEE 802.11g & IEEE 802.11b standards
Supports 64/128-bit WEP, WPA & WPA2 encryption
Supports 128-bit WPA-PSK & WPA2-PSK (TKIP/AES) encryption
Supports Remote and Web management (HTTP)
Supports VLAN mapping, MAC Filtering, NAT, DMZ and UPnP
Easy configuration
Supports Windows 2000, XP, Vista and Win7

Up to 300Mbps
Internal Omni-directional Antenna 2.4GHz 2T2R
Compatible with IEEE 802.11n, IEEE 802.11g and IEEE 802.11b standards
Supports WPA data security, IEEE 802.1x authentication, TKIP/AES encryption, 64/128-bit
WEP encryption
Provides USB interface
Supports Ad-Hoc and Infrastructure modes
Supports roaming between access points when configured in Infrastructure mode
Easy configuration
Provides monitoring information
Supports Windows 2000, XP, Vista, Mac 10.3+, Linux 2.4+

PCI local bus specifications revision 2.2
Conforms with IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX standards
10 or 100 Mbps speed
Realtek Chipset 8139
On-board socket for an optional remote boot ROM
1 diagnostic LED
Wake On LAN function

300M wireless transmission rate, 4 10/100M LAN ports
MIMO technology with stronger signal penetration strength, wider wireless coverage, providing better performance and stability
CCA technology automatically avoids channel conflicts using its channel selection feature
Compatible with 11g and 11b equipment, Intel Centrino Compatibility tested
The TL-WR841N Wireless N Router is a combined wired/wireless network connection device designed specifically for small business, office, and home office networking requirements. It complies with the IEEE 802.11n standard with wireless transmission speeds of up to 300M. The router adopts 2*2 MIMO technology and has two external Antennas providing even better wireless performance, transmission rates, stability and coverage. At the same time, CCA technology automatically avoids channel conflicts using its channel selection feature. It also works well with other 11g and 11n protocol wireless products.
The TL-WR841N provides multiple security measures; supporting SSID broadcast control, MAC address access control, WEP encryption, WPA/WPA2, and WPA-PSK/WPA2-PSK authentication. At the same time QSS(Quick Secure Setup)complies with WPS allowing for worry-free wireless security configuration. These combined security features will guard against intruders using stronger, safer protection.

The TL-WR841N allows companies, offices, and homes to share one Internet connection with more computers. Apart from this product? simple setup and more common broadband router functions, it also supports priority of service where applications using a lot of bandwidth that are sensitive to interruptions such as voice and video are given priority in order to assure quality. The router also supports on-demand dialing, online access management, Automatic virus isolation, UPnP, DDNS, advanced system security record, friendly user interface, and simple, easy configuration allowing all users to comfortably configure the router. This is a fashionable product with superior performance and should be your first choice when setting up a network.

2 fixed omni directional antennas
Supports PPPoE, Dynamic IP, and static IP broadband functions
Automatic dialing, On-demand dialing, fixed time dialing, filling most dialing requirements
Supports UPnP, DDNS, static routing, VPN Pass-through
Supports virtual server, special application and DMZ host ideal for creating a website within your LAN
Supports SSID broadcast control and MAC access control list
Supports 64/128/152-bit WEP, complies with 128 bit WPA standard(TKIP/AES), supports MIC, IV Expansion, Shared Key Authentication, IEEE 802.1X
Built-in firewall features IP, MAC, URL filtering which flexibly controls online access and time
Built-in DHCP server with automatic dynamic IP address distribution
User interface supports free WEB software updates
Supports configuration file backup and restore.
Sleek exterior, can be mounted on a wall or placed horizontally on a table or desk

300M Wireless transmission rate
MIMO technology with stronger signal penetration strength, wider wireless coverage, providing better performance and stability
CCA technology automatically avoids channel conflicts using its channel selection feature
Compatible with 11g and 11b equipment, Intel Centrino Compatibility tested
Supports Sony PSP for online game
The TL-WN821N Wireless N USB Adapter complies with IEEE 802.11n, IEEE 802.11g, and IEEE 802.11b standards. Wireless transmission rates can reach up to 300Mbps. The adapter employs MIMO technology and has internal Intelligent Antennas providing even better wireless performance, transmission rates, stability and coverage. At the same time, CCA technology automatically avoids channel conflicts using its channel selection feature. This product supports 64/128-bit WEP encryptions, as well as WPA/WPA2 and WPA-PSK/WPA2-PSK encryptions and mechanisms in addition to the adapter’s QSS (Quick Secure Setup) feature, allowing users to quickly and easily setup wireless security. This product can also simultaneously operate bandwidth intensive applications such as voice, and video. Applications using a lot of bandwidth that are sensitive to interruptions such as voice and video applications are given priority in order to assure quality. It also works well with other 11g and 11n protocol wireless products.

Omni-Directional 7dBi Antenna with Reverse SMA Connection

Boosts the range of an existing Wireless Device that has a removable SMA Antenna. Compatible with 802.11b (11Mbps) and 802.11g (54/108/125). Reverse SMA is the most common standard for removable antennas for wireless routers and pci cards. Found on most D-link, Netgear, Belkin, Linksys and many other makes. If the antenna can be removed on your wifi device, you can replace it with this antenna to get an improved signal.

Specification

Colour: Black.
Connection: Reverse SMA (standard for nearly all wireless routers/PCI cards with removable antenna).
Length: 29cm total
Frequency: 2400-2500MHz (2.4g to 2.5g)
Omni-Directional: transmits 360degrees
Powerful 7dB gain.
Impedance: 50 Ohm
Polarisation: Linear, Vertical
Retail blister packs.

Model.
Wireless-G Cardbus Adapter
Description.
Connects your notebook to an existing 802.11b or 802.11g wireless network
Benefits.
Connect a notebook to a wireless b or g network securely
Key Features.
Complies with 802.11g standard, and backwards compatible with 802.11b devices.
Operates in the 2.4GHz frequency spectrum with throughput of up to 54 Mbps.
Installation wizard driver provides smart and easy installation.
Up to 152-bit WEP network security protects your wireless communication.
Wireless roaming optimizes signal strength and quality among Access Points.

Compatible with IEEE 802.11g Wireless Ethernet, providing a Data Transfer rate of 54 Mbps

• Dynamic Data Rate scaling at 54, 48, 36, 24, 18, 12, 9 and 6 Mbps for IEEE 801.11g

• Dynamic Data Rate scaling at 11, 5.5, 2 and 1 Mbps for IEEE 801.11b

• Maximum reliability, throughput and connectivity with automatic data rate switching

• Supports Wireless Data Encryption with 64/128/256-Bit WEP (Wired Equivalent Privacy) standard

for security (NLWL-USB01 doesn’t support 256-Bit WEP) for the multi-path environment

• Compliant with Universal Serial Bus Rev 2.0, 1.1 & 1.0 (NLWL-USB01 Only)

• Easy to use Setup & Diagnostic utilities

• Compatible with Infrastructure and Ad-Hoc Wireless Networks.

• Driver supports Windows 98SE, ME, 2000, XP & Vista.

USB 54 Mbps Wireless 11G Adaptor with Removable High Gain Antenna